Nikon SB-28 - Manual (Page 32)

3 Select the flash mode.
—Press the
µ button until the desired auto flash mode indicator
appears on the LCD panel:
tø Matrix Balanced Fill Flash
and Center-Weighted
Fill Flash/Spot Fill-Flash
t
Standard TTL Flash
4 Check the shooting distance.
A flash shooting distance range
of 0.8 to 6m (2.6 to 20 ft) is shown.
5 Wait for the ready-light to come on and make sure the subject
is in focus before taking the picture.
• If the ready-light blinks for approx. 3 seconds after shooting, this indicates
the light may have been insufficient for correct exposure. In this case, use
a wider aperture or move closer to the subject.
32
TTL Auto Flash
t
Mode
Flash settings
For cameras in Group II: F4-Series, F-801s/N8008s, F-801/ N8008, Pronea 600i/6i