Example 2: setting a destination using places list – NISSAN 2011 Maxima User Manual
Page 189

Black plate (190,1)
08NJ-N Edited: 2010/ 10/ 18
9-24
Voice recognition
“Plan View Map”.
4. Voice feedback will be provided when the
command is accepted, and the map is
displayed in 2D (Plan View).
Example 2: Setting a destination using
places list
1. Push > located on the steering wheel switch. 2. The system announces, “Please say a command”. 3. After the tone sounds and the icon on the screen changes from [ ] to [ ], speak “Places”. 4. If a route is already set, choose “Near Current Location”, “Along Route” or “Near 5. After the tone sounds and the icon on the screen changes again, speak “Along Route”. 6. Voice feedback will be provided when the command is accepted, and the list of places 7. After the tone sounds and the icon on the screen changes again, speak “Two”. 8. Voice feedback will be provided when the command is accepted, and the list of places 9. After the tone sounds and the icon on the screen changes again, speak “One”. 10. Voice feedback will be provided when the command is accepted, and the system
Destination”.
of interest categories appears.
of interest in the category specified in the
previous step appears.
starts calculating a route to the selected
facility.