Uploading a configuration plan from a handset, Regulatory domain mismatch, Uploading a configuration plan from a handset -10 – NEC MH160 User Manual
Page 44: Regulatory domain mismatch -10, Them. see
4-10 Using the Settings Editor
NEC MH150/MH160 Mobile Handset Administration Tool-Installation and User Guide - Issue 1
Step 2
In the Editable settings fields, enter the Extension and User name for
this handset. Note that the Extension field has a Next button that is
useful when configuring a quantity of handsets.
Step 3
Copy the settings to the Handset settings fields using the Copy
settings arrow.
Step 4
Click Write Handset.
You may want to save the configuration, load new files or edit settings for
the next handset (steps 1 and 2) during the download.
Step 5
(Conditional) If you wish to save the settings unique to this handset,
enter the identifying information into the filename fields, such as user
name or extension number and then click Save As.
Step 6
When the Handset indicator turns off, the download has finished and the
handset may be removed from the charger.
Uploading a configuration plan from a handset
Step 1
Click the Read Handset button to begin the upload.
Step 2
You may copy these settings over to the Editable settings fields using
the left Copy settings arrow to use them to create configuration plans as
described above or to save them by user or extension.
Regulatory Domain Mismatch
The options that are available on the Settings Editor may not match the
options currently enabled on the handset. This could happen if you
update the software in the handset without also updating the MH
Administration Tool. Or you could update the MH Administration Tool but
not the handset software. In either of these situations different options
may appear on the MH Administration Tool than are available in the
handset.
If the Regulatory Domains in the handset are not supported by the
currently installed version of the MH Administration Tool, a warning
message will appear:
Warning: Regulatory domain support is
down level with respect to this phone's
firmware version. Recommend upgrading
the application.
This message indicates that the MH Administration Tool software needs
to be updated. Please see
“Software Updates” on page 3-7
If it is necessary to down rev the handset and MH Administration Tool
code, this message could also appear. If so, reset the handset defaults
and proceed with configuration.