Navigon 33xx - Manual (Page 15)

User’s manual NAVIGON 33xx | 43xx max
Switching on the NAVIGON 33xx | 43xx max - 15 -
Switching the navigation device to standby mode
►
Press briefly (max. 1.5 seconds) on the (On/Off) key.
- or -
1. Tap in the N
AVIGATION
window of the navigation software on the
button.
2. Tap on Standby.
Automatic Standby
You can configure the NAVIGON 33xx | 43xx max so that the
navigation device is automatically switched to standby mode.
►
In the N
AVIGATION
window tap on Options > Settings > General >
Automatic Standby.
►
Select after how much time you want the navigation device to be
switched to standby mode (Never, After 10 mins, After 20 mins,
After 30 mins).
►
Select Power Loss in order to switch the device to standby mode
when the external power supply is interrupted. As soon as the
device is connected again to the external power supply it will switch
on again automatically.
Switching off the navigation device
►
Press the (On/Off) key and keep it pressed until the device
switches off. (Approx. 4 seconds.)
- or -
1. Tap in the N
AVIGATION
window of the navigation software on the
button.
2. Tap on Off.
Note:
When you switch the navigation device to standby mode, the next
time it is switched on it will start very quickly with the window which was
active when switched off. In standby mode the device still consumes a
small amount of energy however. The battery may be flat after a few
days.
When you switch off the device, it consumes no energy. It can then take
several months for the battery to become flat. Switching the device on
again triggers a restart which can take some time (approx. 30 seconds).
Your settings and your saved destinations and routes will be retained.