beautypg.com

Bass eq: bass eq +4 db, Treble eq: treble eq +6 db, Output level: output +3 db – Nuvo T2 User Manual

Page 16: Balance: l------x------r

background image

Audio Settings
These selections are intended for AM, FM and XM stand-alone
applications. They should be left at default settings for NuVo
audio systems. These systems allow identical audio control on
a per-zone basis.

Bass EQ: Bass output can be adjusted +12 dB or down
to 12 dB. The default setting is flat. This feature is
useful for stand-alone use with an amplifier that does
not have bass EQ control. If you are using the T2 with a
NuVo audio distribution system, or another system
that allows for EQ control, you should leave the T2 set
at 0 dB (flat), fig 14.
Treble EQ: Treble can be adjusted the same as bass.
The level ranges from 12 dB to +12 dB and defaults at 0
dB. As with the bass setting, this should not be used
unless there is no external EQ capability, fig. 15.
Balance: Left and Right channel output can be
adjusted if desired. As with the EQ adjustments, this
feature should not be used when the T2 is used with
an audio system that already has EQ and balance
adjustment capability, fig. 16.
Output Level: The signal level from the T2 can be
adjusted up or down to match the input gain
characteristics of other audio equipment in the
system. The default setting is 0 dB and the range is 6
dB to +12 dB, fig. 17.

Auto-ON

Enable/Disable: The T2 can be set to turn the tuner
displays on automatically when power is applied. This
is a good feature for stand-alone use. In the event of
a power outage or anytime AC power is lost and
restored, the T2 tuners will automatically turn back on
with the last-used settings without having to use the
ON/OFF button on the front panel.

This selection is not necessary when using the T2 with
the NuVo Concerto system, because the built-in power
management system between the T2 and Concerto will
automatically turn on the tuners when the Power
button is pressed on any of the Concerto's Display
Pads.

Fig. 14

Fig. 15

Fig. 16

Fig. 17

PUSH TO
ENTER

SELECT

Tuner A

Bass EQ:
Bass EQ +4 dB

FM STEREO•AM•WEATHER

PUSH TO
ENTER

SELECT

Tuner A

Treble EQ:
Treble EQ +6 dB

FM STEREO•AM•WEATHER

PUSH TO
ENTER

SELECT

Tuner A

Balance:
L------x------R

FM STEREO•AM•WEATHER

PUSH TO
ENTER

SELECT

Tuner A

Output Level:
Output +3 dB

FM STEREO•AM•WEATHER

Page 15