Net Optics Director - Manual (Page 49)

Director
45
Command Sub-Command Arguments Example and description
filter
(continued) commit filter commit
Activates pending filters previously defined using
filter add and filter ins commands but does NOT save
the changes as the new default configuration
del ipv6=y
id= filter del id=3
Arguments:
ipv6=y for IPv6 addressing; omit for IPv4
is a decimal number from 1 to 999 that
identifies which filter is to be deleted
Deletes a pending filter
discard filter discard
Clears all pending filters
ins id=
ipv6=y
in_ports=
=
action=< redir | drop >
redir_ports= filter ins id=myfilter-1 in_ports=n1.1-n1.3 ip_
src=10.1.1.1 action=drop
Arguments:
is a decimal number from 1 to 999 that
specifies the priority of this filter (the address for
the filter in the filter CAM)
The rest of the filter parameters are as defined for
the filter add command
Defines and prioritizes a filter
list ipv6=y filter list
Arguments:
ipv6=y for IPv6 addressing; omit for IPv4
Displays all pending filters (with filter IDs)
running ipv6=y filter running
Arguments:
ipv6=y for IPv6 addressing; omit for IPv4
Displays all active filters
sync filter sync
Loads the pending filter list with a copy of the currently
active filters
help help filter
Arguments:
is any CLI command
Displays information about the specified CLI command;
if is omitted, displays a list of all CLI
commands
history history
Displays a numbered list of previously executed CLI
commands; any command can be executed directly
by entering the command number preceded by an
exclamation point; up- and down-arrow keys can be
used to scroll through the command history buffer
(see ! command)