NetComm NP1100 - Manual (Page 8)

8 NP1100 10/100Mbps PCI Bus Fast Ethernet Card
YML567 Rev2
Windows® Me
1. As Windows® Me starts the 10/100Mbps Fast
Ethernet Adapter will be found and the drivers
will be automatically installed. You will need
to update the driver to continue.
2. Click on Start – Settings – Control Panel.
3. Open Network and Dial-Up Connections and
then open System.
4. Select Device Manager, click on the Realtek
RTL8139(A) PCI Fast Ethernet Adaptor under
Network Adaptors and click on the Properties
button.
5. Select the Driver tab and click on the Update
Driver button.
6. The Update Device Driver Wizard
screen will appear. Choose Search for
a better driver than the one your device
is using now. [Recommended], type
D:\WINME (where “D” is the letter of
your CD-ROM drive) in the Specify a
location: box and click on Next>.
7. Select the updated driver and click on
Next>.