NetComm NP1100 User Manual
Page 2
2
NP1100 10/100Mbps PCI Bus Fast Ethernet Card
YML567 Rev2
Contents
Step 1: Hardware Installation ............................................................... 3
Step 2: BIOS Configuration.................................................................. 4
Step 3: Driver Installation ................................................................... 5
Step 4: What’s next? ........................................................................ 17
Troubleshooting ..................................................................................... 18
Features ............................................................................................... 19
Specifications........................................................................................ 20
Appendix A: Glossary ............................................................................ 21
Appendix B: Registration and Warranty Information .................................. 28
Caution
The NetComm NP1100 must be installed and operated in accordance with the
instructions provided in this Quick Start Guide. Damage caused by incorrect or
careless installation is not covered by warranty.
Static Electricity
Computers are very sensitive to static electricity which may be discharged by the
user when the internal circuitry is touched. Ensure that you have discharged any
static prior to touching the computer’s PCI slots and to removing the NetComm
NP1100 from its static bag, by touching an earthed object first. This can be the
computer’s Power Supply provided the power is switched off at the wall, but the
power cord is connected to the power socket; static will be discharged through the
power cord’s earth connection.