Eizo 531L - Manual (Page 74)

English
74
6. USING THE TERMINAL PROPERTIES
Adding another printer settings
This enables to add a printer when no printer is connected to the LPT1 port.
1.
Select LPT1 and click [Add].
2.
“Printer Properties” dialog box is displayed.
[Friendly Name]..................Name the printer or use the indicated name. (Some
programs do not support server and printer name
combinations of more than 31 characters.)
• When your printer is listed
[Manufactures] / [Printers]
...................................Select the manufacturer and model of your printer.
• When your printer is not listed
[User Defined].....................Click the check box.
[Model Name] ....................Type the model and manufacturer of your printer.
[Make this the default printer]
...................................Click the check box to set the printer as the default
printer.
Click [OK] to return to the “Terminal Properties” dialog box.
Click [OK] to save the settings and close the “Terminal Properties” dialog box.
Deleting a printer settings
This enables to delete printer settings when a printer is connected to the LPT1 port.
1.
Select LPT1 and click [Delete].
2.
“Delete Printer” dialog box is displayed.
Click [Yes] to delete the settings of the printer.