Eizo 531L - Manual (Page 16)

English
16
3. SETTING UP THE eClient
6.
IP address setting page is displayed.
[Yes, use the IP information supplied by DHCP.]
...................................Select this when using DHCP service. All the
necessary information of the eClient including the IP
address will be obtained by the DHCP.
[No, I will enter static IP information.]
...................................Select this when not using DHCP service. Enter the IP
address of the eClient.
If DHCP service is not in operation, following message
appears.
Type a [Terminal Name] for connection to a WTS by the RDP (Microsoft Remote
Desktop Client) protocol.
[Terminal Name] ................Type the name to identify this unit on the network.
Click [Next>].
Refer to step 8 if you select [Yes, use the IP information supplied by DHCP.]
Refer to step 7 if you select [No, I will enter static IP information.]