Eizo 531L - Manual (Page 45)

English
4. ADDING & CHANGING A CONNETION NAME
45
[Connection Preference]
[Baud Rate].........................Set the data transmission rate from 110 to 115,200.
[Data Bits]...........................Set the data bits.
[Parity]................................Set to check the data’s appropriate transmission.
[Stop Bits] ...........................Set the length of the Stop Bits.
[Flow Control]....................Set Flow Control.
[Call Option] tab
[Cancel the call if not connected within]
...................................Click the box and type the interval to the right box
before canceling the connection in case of connection
failure.
[Wait for dial tone before dialing]
...................................Click to dial after dial tone.
[Wait for credit card tone]
...................................Click to set the intervals before canceling the
connection using a credit card.
[Extra Settings (Special modem commands may be inserted into the dial strings)]
...................................Enter
a special modem command if needed.
Click [OK] on [Device Properties] when finished. The dialog box saves the settings
and closes.
• Click the [Close] button to cancel the settings.
NOTE
• When changing settings in the [Device Properties], click the [Call Option] tab
before clicking [OK] to close the window.
Click [Next>].