Eizo CG221 User Manual
Page 28
switch while touching the Auto Adjustment switch.
[To unlock]
Turn off the monitor's power by touching the power switch. And then touch the power
switch while touching the Auto Adjustment switch once again.
Off Timer
The off timer function causes the monitor to automatically enter a power off state after
a predetermined amount of time has lapsed. This function was created to reduce
afterimage characteristics that are particular to LCD monitors when the monitor screen
is left on for a long period without use.
[Procedure]
(1) Select
(2) Select "Enable" and touch the Right and Left switches to adjust the "On
Period" (1 to 23 hours).
[Off Timer System]
PC
Monitor
Indicator lamp
ON
Power Save
On period (1H-23H)
Operation
Light
Off
Power saving
Off
Light
Last 15 min. in "On period"
*1
Operation
Flashing light
Off
Power saving
Off
Light
"On period" expired
Power off
Off
Off
*1 Advance notice will be given 15 minutes before the monitor automatically
enters the "Power Off" mode. To delay entering the "Power Off" mode, touch
the power switch during the advance notice period. The monitor will continue to
operate for an additional 90 minutes.
[Power Resumption Procedure]
Touch the power switch to return a normal screen.