Lifebreath 200MAX RX EN - Manual (Page 28)

28
Fully Dedicated System
Example diagram only - duct configuration may
change depending on model
Please Note: It is the responsibility of the installer to ensure all ductwork is sized and
installed as designed to ensure the system will perform as intended. All air movement
devices have a performance curve. The amount of air (CFM) that an HRV/ERV will deliver is
directly related to the total external static pressure (E.S.P.) of the system. Static pressure is
a measure of resistance imposed on the blower by length of duct work/number of fittings
used in duct work, duct heater etc.
Duct configuration may change depending on the
model. See Specifications for your unit.
ATTENTION
Installation Diagrams