Ipv6, Traffic meter, Ipv6 traffic meter – NETGEAR N750 Wireless Dual Band Gigabit Router WNDR4000 User Manual
Page 81
Chapter 7. Advanced Settings
|
81
N750 Wireless Dual Band Gigabit Router WNDR4000 User Manual
IPv6
The IPv6 feature allows you to configure and check the status of your IPv6 Internet
connection.
Select Advanced > IPv6, and the following screen displays:
The default setting is Disabled, which turns off the IPv6 function. To turn it on, select your
connection type from the Internet Connection Type list and click Apply.
•
If your ISP did not specify the connection type, you can select 6to24 Tunnel.
•
If your ISP explicitly indicates that your IPv6 connection is not DHCP, PPPoE, or Fixed IP,
or your ISP indicates that it is IPv6 auto config, you can select Pass Through.
•
If you are not sure about the IPv6 connection, you can use the Setup Wizard to
automatically detect your Internet connection type.
Traffic Meter
Traffic metering allows you to monitor the volume of Internet traffic passing through your
wireless router’s Internet port. With the Traffic Meter utility, you can set limits for traffic
volume, set a monthly limit, and get a live update of traffic usage.