Eizo ColorEdge CG242W - Manual (Page 18)

18
2. Adjusting Screen
Adjustment Contents
Menu Function Descriptions Adjustable range
Brightness To set the brightness of the screen 0~100%
Tips
• The values shown in the “%” are available only as reference.
Temperature To set the color temperature 4000K~10000K
in 500 K increments (including 9300 K)
Tips
• The values shown in the Kelvin are available only as a reference tool.
• While color temperature is adjusted, is adjusted automatically according to the
color temperature.
• Setting the temperature under 4000 K or over 10000 K invalidates the color
temperature setting. (The color temperature's setting turns "Off".)
• Setting the invalidates the adjustment.
Gamma To set the gamma value 1.8~2.6
Tips
• If setting the gamma value, the using the monitor in the digital signal input is
recommended. If using the monitor in the analog input signal, set the gamma value
from 1.8 to 2.2.
Saturation To change the saturation -100~100
Setting the minimum level (-100) turns the
image to the monochrome.
Note
• This function does not enable to display every color gradation.
Hue To change the flesh color, etc. -100~100
Note
• This function does not enable to display every color gradation.
Gain To change each color
(red, green and blue) 0~100%
By adjusting the red, green and blue color
tones for each mode, custom colors can be
defined. Display a white or gray background
image and adjust the .
Tips
• The values shown in the “%” are available only as reference.
• The setting invalidates this setting. The setting varies with
color temperature.
Note
• This function does not enable to display every color gradation.
6 colors To adjust and in
each color (Red, Yellow, Green, Cyan,
Blue and Magenta) Hue: -100 ~ 100
Saturation: -100 ~ 100
Reset To return the color settings to the
default settings Select the .