Eizo ColorEdge CG242W - Manual (Page 15)

2. Adjusting Screen
1
(3) The screen position is incorrect.
Use the adjustment.
The correct displayed position of the monitor is decided because the number and the position of
the pixels are fixed. The adjustment moves the image to the correct position.
Select and adjust the position by using , , and . If vertical bars of distortion
appear after finishing the adjustment, return to adjustment and repeat the
previously explained adjustment procedure. ("Clock" => "Phase" => "Position")
(4) Screen image is smaller or larger than the actual screen images.
Use the adjustment.
Adjustment is needed when the input signal resolution and the resolution now being displayed
are different.
Select and confirm if the resolution now being displayed is the same as the input
resolution. If it is not, adjust the vertical resolution using and and adjust the horizontal
resolution using and .
5
Adjust the output signal range (Dynamic Range) of the signal.
Use the of menu.
This controls the level of output signal range to display the whole color gradation (256 colors).
[Procedure]
1. Display Pattern 2 in full screen on the monitor using the “Screen Adjustment Utility” or the
screen adjustment pattern files.
2. Choose from the menu, and press .
A message “Your setting will be lost it you press AUTO button” appears.
3. Press while the message is displayed.
Color gradation is adjusted automatically.
4. Close the Pattern 2. When using the “Screen Adjustment Utility”, close the program.
A part of image is cut due to short dots.
Extra image is displayed due to excessive dots.