Connectivity, Infrared – Nokia 5070 User Manual

Page 61

Automatic keyguard

— to set the keypad of your phone to lock automatically after a preset time delay when the

phone is in the standby mode and no function of the phone has been used. Select

, and set the time from 5

seconds to 60 minutes.

Security keyguard

— to set the phone to ask for the security code when you unlock the keyguard. Enter the

security code, and select

When the keyguard is on, calls still may be possible to the official emergency number programmed into your device.

Cell info display

— to receive information from the network operator depending on the network cell used

(network service)

Welcome note

— to enter a welcome note to be shown briefly when the phone is switched on

Operator selection

Automatic

— to set the phone automatically to select one of the cellular networks

available in your area. With

Manual

, you can select a network that has a roaming agreement with your home

network operator.

Confirm SIM service actions

— See

SIM services

Help text activation

— to select whether the phone shows help texts

Start-up tone

— to select whether the phone plays a start-up tone when the phone is switched on

■ Connectivity

You can connect your phone to compatible devices using an infrared connection. You can also define the
settings for packet data dial-up connections.

Infrared

You can send or receive data to or from a compatible phone or data device (for example, a computer) through
the infrared (IR) port of your phone. To use an IR connection, the device with which you want to establish a
connection must be IrDA compliant.