Nokia 5070 - Manual (Page 81)

81 Copyright © 2006 Nokia. All rights reserved.
To set the PTT settings for use, select PTT settings .
To set the required settings for the PTT connection, select Config. settings .
To open the browser and to connect to the PTT network portal provided by the service provider, select Web .
■ Connect to and disconnect PTT
To connect to the PTT service, select Menu > Push to talk > Switch PTT on . indicates the PTT connection.
indicates that the service is temporarily unavailable. The phone automatically tries to reconnect to the service
until you disconnect from the PTT service. If you have added channels to the phone, you are automatically
joined to the active (
Default or Listened ) channels, and the name of the default channel is displayed in the
standby mode.
To disconnect from the PTT service, select Switch PTT off .
■ Make and receive a PTT call
Select Menu > Settings > Tones > Push to talk settings to set the phone to use the loudspeaker or headset for
PTT communication.
Warning: Do not hold the device near your ear when the loudspeaker is in use, because the volume may be
extremely loud.
When connected to the PTT service, you can make or receive dial-out calls, channel calls, or one-to-one calls.
One-to-one calls are calls you make to only one person.
Make a dial-out PTT call
For a dial-out PTT call you can select multiple PTT contacts from the contact list. The recipients get an incoming
call and need to accept the call in order to participate. A dial-out call creates a temporary channel, and the
participants join this channel only for the duration of the call. After the call, the temporary dial-out channel is
deleted.