Eizo FLEXSCAN MX240W - Manual (Page 19)

3. Screen Adjustment and Settings
1
Adjustment Contents
Menu Function Descriptions Adjustable range
Brightness To set the brightness of the screen 0~100%
Tips
• The values shown in the “%” are available only as reference.
Temperature To set the color temperature 6500K~15000K
in 500 K increments (including 9300 K)
Tips
• The values shown in the Kelvin are available only as a reference tool.
• While color temperature is adjusted, is adjusted automatically according to the
color temperature.
• Setting the temperature under 6500 K or over 15000 K invalidates the color
temperature setting. (The color temperature's setting turns "OFF".)
• Setting the invalidates the adjustment.
Gamma To set the gamma value 1.8~2.6
Saturation To change the saturation -100~100
Setting the minimum level (-100) turns the
image to the monochrome.
NOTE
• The adjustment may cause undisplayable color tone.
Hue To change the flesh color, etc. -100~100
NOTE
• Using adjustment may not obtain proper tone reproduction.
Gain To change each color
(red, green and blue) 0~100%
By adjusting the red, green and blue color
tones for each mode, custom colors can be
defined. Display a white or gray background
image and adjust the .
Tips
• The values shown in the “%” are available only as reference.
• The setting invalidates this setting. The setting varies with
color temperature.
6 colors To adjust and in
each color (Red, Yellow, Green, Cyan,
Blue and Magenta) Hue: -100 ~ 100
Saturation: -100 ~ 100
Reset To return the color settings to the
default settings Select the .