beautypg.com

Nexgrill 720-0133-LP User Manual

Page 23

background image

CARE AND MAINTENANCE

21

created as water contacts the hot grill assists the
cleaning process by softening any food
particles. The food particles will fall and burn.
If the grill is allowed to cool before cleaning,
cleaning will be more difficult.

ENSURE THAT THE GAS SUPPLY AND
THE KNOBS ARE IN THE “OFF”
POSITION. MAKE SURE THE
RANGETOP BURNER IS COOL BEFORE
REMOVAL.

GRILL BURNERS

Extreme care should be taken when moving a
burner as it must be correctly centered on the
orifice before any attempt is made to relight the
grill. Frequency of cleaning will depend on
how often you use the grill.

MAIN GRILL BURNER CLEANING

Ensure the gas supply is off and the knobs are
in the “OFF” position. Make sure the grill is
cool. Clean the exterior of the burner with a
wire brush. Clear stubborn scale with a metal
scraper. Clear any clogged ports with a
straightened paper clip. Never use a wooden
toothpick as it may break off and clog the port.
Please note if insects or other obstructions are
blocking the flow of gas through the burner,
will need to call our customer service line.

GREASE TRAY CLEANING:

The grease tray should be emptied and wiped
down periodically and washed in a mild
detergent and warm water solution. A small
amount of sand or cat litter may be placed in
bottom of grease tray to absorb the grease.
Check the grease tray frequently, don’t allow
excess grease to accumulate and overflow out

of the grease tray.

SIDE BURNER CLEANING:

Clean the exterior of the burner with a
wire brush. Clear any clogged burner
ports with a
straightened paper clip. Never enlarge
the burner ports. Never use a wooden
toothpick as it may break off the clog
the port.

STAINLESS STEEL FOR SIDE
BURNER
:

There are many different stainless steel
cleaners available. Always use the
mildest cleaning procedure first,
scrubbing in the direction of the grain.
Do not use steel wool as it will scratch
the surface. To touch up noticeable
scratches in the stainless steel, sand very
lightly with dry 100 grit emery paper in
the direction of the grain.

SIDE BURNER GRATE:

The top burner grate is stainless steel.
To avoid burns do not clean a hot grate.
They may be wiped while in place with
hot, soapy water, rinsed and wiped dry.
Never immerse a hot grate in water.