NEC N8406-022A - Manual (Page 44)

Command Line Interface 44
Link status information
Command: /info/link
------------------------------------------------------------------
Port Speed Duplex Flow Ctrl Link
---- ----- -------- --TX-----RX-- ------
1 1000 full yes yes up
2 1000 full yes yes up
3 1000 full yes yes up
4 1000 full yes yes up
5 any any yes yes down
6 any any yes yes down
7 any any yes yes down
8 any any yes yes up
9 any any yes yes down
10 any any yes yes down
11 any any yes yes down
12 any any yes yes down
13 any any yes yes down
14 any any yes yes down
15 any any yes yes down
16 any any yes yes down
19 100 full no no up
20 1000 full no no up
21 1000 full no no up
22 any any any yes down
23 any any yes yes down
24 any any yes yes down
Use this command to display link status information about each port on a switch, including:
• Port
number
•
Port speed (10 Mb/s, 100 Mb/s, 1000 Mb/s, or any)
•
Duplex mode (half, full, or any)
•
Flow control for transmit and receive (no or yes)
•
Link status (up or down)
Port information
Command: /info/port
Port NAME VLAN(s)
---- -------------- -------------------------------
1 Downlink1 1
2 Downlink2 1
3 Downlink3 1
4 Downlink4 1
5 Downlink5 1
6 Downlink6 1
7 Downlink7 1
8 Downlink8 1
9 Downlink9 1
10 Downlink10 1
11 Downlink11 1
12 Downlink12 1
13 Downlink13 1
14 Downlink14 1
15 Downlink15 1
16 Downlink16 1
19 Mgmt 4095
20 Uplink1 1
21 Uplink2 1
22 Uplink3 1
23 Uplink4 1
24 Uplink5 1
Port information includes:
• Port
number
• Port
name
• VLAN
membership