Norton Abrasives C6136 User Manual
Page 11
11
Blade Shaft Installation
Observe rotation arrow on blade and do not exceed maximum RPM
stamped on blade.
To meet ANSI safety standards, larger diameter blade collars
are required for large diameter blades. Information is available
upon request.
NOTE: Organic bonded blades (A) must have a blotter. The blotter
(B) must extend past the blade collar contact area as shown.
Blade Guard
Diamond Blade
Loose Collar
5/8” Flat
Washer &
Lock Washer
Blade Shaft Screw
Drive Pin
Directional Arrow
Tight Collar
Drive Pin Hole
Blade Installed