Niles Audio SI-275 - Manual (Page 19)

sP
eC
ifi
C
ations
18
sPeCifiCations
Design Principle
linear voltage/current amplification.
Continuous Average Power Output
75 watts per channel rMS at 8 ohms, both channels driven
120 watts per channel rMS at 4 ohms, both channels driven
Input Impedance
Approximately 15K ohms
Input Sensitivity
.920V for 8 ohm rated power
.810V for 4 ohm rated power
Overall Voltage Gain
28.5 db
Frequency Response
bandwidth from 10 hz to 70 khz (-1 db)
Signal to Noise Ratio
> 115 db, A-weighted
Total Harmonic Distortion
8 ohms
.02% thd from 20 hz to 10 khz @ full rated power
4 ohms
.02% thd from 20 hz to 10 khz @ full rated power
Overall Dimensions
17” wide 4” high (including feet) 13-1/8” deep
Weight
21 lbs