Niles Audio SI-275 - Manual (Page 15)

14
installation
AC Power Plug
steP
Plug the female IEC socket of the sup-
plied AC cord into the IEC receptacle
on the rear of the amplifier.
Plug the two-prong plug into a
correctly grounded 120V 60 Hz
wall outlet.
CAUTION! Typically the preamp/
receiver’s switched outlet is not rated
for a power amplifier.
desCriPtion
Just like a computer or printer, the SI-275
has an Ac cord which unplugs either at the
amp or at the wall for your convenience.
If you use a grounded power strip, surge
suppressor or extension cord, verify that
proper ground is maintained.
the SI-275 draws a maximum of approxi-
mately 700 watts from an Ac wall outlet.
use the auto turn on circuit instead.