Eizo CG210 - Manual (Page 24)

Manual The monitor will not detect signals automatically in this mode.
Select the active input by pressing the input signal selection button
on the monitor's control panel.
* When "1" or "2" is selected, the power saving mode of the monitor activates only
if both PCs are in power saving mode.
The LCD monitor can be used with an arm by removing the tilt stand and attaching the
arm or stand to the LCD monitor.
Using our optional arm or stand is recommended. (Ask your local dealer for
information.)
* If you will use the arm or stand of other manufacturers, confirm the followings to
the manufacturers before selecting.
●
Hole spacing on the arm mounting: 100 mm x 100 mm (VESA
compliant)
●
Supportable Weight: Total weight of the monitor (without stand) and
attaching equipment such as a cable
●
TÜV/GS approved arm or stand
* Please connect cables after attaching an arm stand.
Setup Procedure