Eizo CG210 - Manual (Page 19)

Signal Cable Connector on PC PC
Signal Cable (FD-C39
enclosed) +ADC-DVI
display adapter
(commercially available) Video Output
Connector / ADC
Input Connector
(monitor) / DVI Power Mac G4 / G5(ADC)
* ADC-DVI display adapter is required if the monitor connects to Power Mac G4 /
G5. The adapter is commercially available.
2.Plug the power cord into the power connector on the rear of the
monitor.
3.Lead the power cord and signal cable into the cable holder at rear
of the monitor.
* The cables are recommended to lead with slight sag for the smooth motion of the
stand and the Portrait/Landscape display.