Coloredge cg210, Cable connection, 1.before connecting – Eizo CG210 User Manual

Page 15: 2.connecting the signal, Cable (d-sub or dvi)

Before connecting your monitor to the PC, change the display screen settings
(

and frequency) in accordance with the

charts.

* When your computer supports VESA DDC, the suitable resolution and the

refresh rate are set by just plugging your monitor into the computer without any
manual settings.

* Be sure that the power switches of both the PC and the monitor are OFF.

1.Plug the signal cable into the connector at the rear of the monitor

and the other end of the cable into the video connector on the PC.

After connecting, secure the connection with the screw-in fasteners.

Analog Input