Default numbers and addresses, Ringing tones, images, and call text for contacts, Ringing tones, images, and call text – Nokia 5230 User Manual

Page 53: For contacts

● Voice tags are sensitive to background noise. Record voice tags and use them in

a quiet environment.

● Very short names are not accepted. Use long names, and avoid similar names for

different numbers.

Note: Using voice tags may be difficult in a noisy environment or during an

emergency, so you should not rely solely upon voice dialing in all circumstances.

Default numbers and addresses

You can assign default numbers or addresses to a contact. If a contact has several

numbers or addresses, you can easily call or send a message to a certain number or

address. The default number is also used in voice dialling.
1. In the contacts list, select a contact.
2. Select Options > Defaults.
3. Select a default to which you want to add a number or an address, and select

Assign.

4. Select a number or an address you want to set as a default.
5. To exit the Defaults view and save the changes, tap outside the view.

Ringing tones, images, and call text for contacts

You can define a ringing tone for a contact or group, and an image and a call text

for a contact. When the contact calls you, the device plays the selected ringing tone

and shows the call text or image (if the caller’s phone number is sent with the call

and your device recognises it).
To add a ringing tone for a contact or a contact group, select the contact or contact

group and Options > Ringing tone, and the ringing tone.
To define a call text for a contact, select the contact and Options > Add call alert

text. Tap the text field to enter the call text, and select

Contacts