Nokia 5230 - Manual (Page 115)

You may receive access point settings in a message from a service provider. Some
or all access points may be preset for your device by your service provider, and you
may not be able to change, create, edit, or remove them.
When you open one of the access point groups ( , , , ), you can see the
access point types:
indicates a protected access point
indicates a packet data access point
To create a new access point, select Access point. The device asks to check for
available connections. After the search, connections that are already available are
shown and can be shared by a new access point. If you skip this step, you are asked
to select a connection method and to define the settings needed.
To edit the settings of an access point, open one of the access point groups, and
select an access point. Follow the instructions from your service provider.
● Connection name — Enter a name for the connection.
● Data bearer — Select the data connection type.
Depending on the data connection you select, only certain setting fields are
available. Fill in all fields marked with Must be defined or with a red *. Other fields
can be left empty, unless your service provider has instructed otherwise.
To use a data connection, your service provider must support this feature, and if
necessary, activate it for your SIM card.
Create access point groups
Select Menu > Settings and Connectivity > Destinations.
Some applications allow you to use access point groups for network connections.
To avoid selecting a single access point every time the device makes a network
connection, you can create a group that contains various access points to connect
to that network and define the order in which the access points are used.
To create a new access point group, select Options > Manage > New
destination.
Connectivity
© 2010 Nokia. All rights reserved. 115