NEC UNIVERGE SV7000 - Manual (Page 56)

– 52 –
Call Back
If called station is busy
Press CALL BACK. Receive service set tone.
– Or –
Press the FLASH key and enter “Call Back” access code.
When both parties become idle, calling party’s phone rings. Calling party
would go off hook and hear ring back tone.
The called station would then be ringing.
Connection is established when the called party answers.
Note: Call Bac k may be pr ogrammed by the system administrator on a
Programmable Line/F eatur e K e y or by the user on a one-touch speed
Using the Soft Key
Press CB Soft Key and receive service set tone.
“CALLBACK SET” is displayed and the CB Soft Key flashes on the display.
Called party
(Time display)
CALLBACK SET 2000
Called party
(Time display)
CALLBACK 2000
Called party
(Time display)
CALLBACK 2001
(Time display)
CALLBACK SET
MIC >>>
calling key .