Nlynx OMNITERM WBT 2.1.0E - Manual (Page 45)

Terminal Emulation Client Settings
Serial Connection Settings Dialog Box (ASCII)
This dialog box only displays when an ASCII session and Serial connection are
selected. Enter the specific value or the default will be used.
Baud Rate:
The default value is 9600.
Data bits:
The default value is 8.
Parity:
The default value is None.
Stop Bits:
The default value is 1.
Flow Control:
The default value is Input.
Transmit Limit:
The default value is Unlimited.
Local Echo:
Click to enable and by default this function is disabled.
42