Nokia 252C - Manual (Page 20)

13
Note: The wake-up message is specific to your currently
selected phone number.
Selecting a Network
Your phone operates on specific networks and sometimes
it must choose which system to use. This can happen, for
example, if you are roaming (i.e. you leave the area where
you have signed up for service).
If you want your phone to work only in certain types of
networks (for example, to take advantage of certain billing
agreements between systems), you can specify this using
“Carrier Selection (Menu 5 1 1)”. See page 45.
Making a Call
1 Extend the phone’s antenna fully.
2 Enter the area code and phone number , then press
SEND. If you make a mistake, press CLR to erase
digits one by one. Press and hold
CLR to clear the
whole display.
A phone symbol appears on the
display. The call is connected when
the phone number disappears from
the display and
CALL
appears.
For international calls, you can enter a
‘+’ at the beginning of a number by pressing
∗∗
. Then enter
the number, then press
SEND. The ‘+’ expands to the
international dialing code prefix.
NO SERVICE
appears and the phone beeps if you try to
make a call when your phone is outside the cellular service
area.