Nokia 252C - Manual (Page 32)

25
For more information on using these special characters
see “Automatically Sending Touch Tones” on page 66.
• To enter a Pause (p), press
∗∗∗
.
Note that a ‘p’ appears on the
display, but this is different from
just keying in the letter ‘p’.
• To enter a Wait (w), press
∗∗∗∗
.
• To enter a link to another location, press
∗∗
. A ‘+’ sign
will appear on the display. A ‘+’ in the middle of a
string links to another location.
Note: A ‘+’ at the beginning of a number is used for
international calls. See “Making a Call” on page 13 for
more information.
Joining two locations for long Touch Tone
strings:
1 Enter the Touch Tone string and store it in the phone
book. Remember its location number.
2 Recall the phone number (assuming it’s already
stored) and remember its location number.
3 Press
∗∗
. The ‘+’ character is displayed after the
phone number.
4 Enter the location number (one or two digits) of the
Touch Tone string (from Step 1). Store the new con-
tents (phone number, ‘+’, and Touch Tone location).
When the phone displays
SAVE IN LOCATION?
enter the location number from Step 2 and press
OK.
For details on sending Touch Tones, see “Sending Touch
Tones” on page 66.