Nokia 252C - Manual (Page 57)

50
2 You’ll see
CALLING CARD
and
the currently selected card. Press
OK to change it.
3 Use ! to move the pointer to
None
,
Card A
or
Card B
, then
press
OK. When the phone asks for your security
code, enter it and press
OK.
If you select
None
, the phone briefly displays
NO
CARD SELECTED
, and no card is selected.
Note: If you’ve already stored card information, and
then later select None, the active card is deselected.
However, stored card information is left intact.If you
select
Card A
or
Card B
, and you’ve never entered
information for the card before, skip to Step 5.
4 If you’ve already entered informa-
tion for a Card, you then have the
option to
Select
,
Edit
, or
Erase
the card. Use ! to move
the pointer to the option you
want, and press
OK.
Select
chooses this card as the one to use.
The phone briefly displays
SELECTED
.
Edit
allows you to change already-entered
information, described in Steps 5 and 6 on next page.
Erase
erases the stored information. To verify that
you want to do this, press
OK at the ERASE?
prompt. Press
CLR if you don’t want to erase the
stored information.
5 The phone prompts you to
SELECT DIALING
SEQUENCE
. Press
OK.