Nautilus PRO SERIES TREADMILLS T7.14 - Manual (Page 4)

N
a
u
ti
lu
s
®
g
et
ti
N
g
s
ta
r
te
d
C ha ng i n g t h e g a m e i n h ea lt h a n d f i t n e s s ™
turning On the Power
The treadmill can be turned on by moving the power switch located at the front
of the treadmill to the ON position. The unit will be in sleep mode, all displays
will be blank. Pressing any key, except STOP, will cause the displays to light up
and the treadmill to enter Standby Mode. Unit will return to Sleep Mode after 30
minutes of inactivity. Be sure to turn treadmill off when not in use. Pressing the
STOP Key while in Standby Mode brings unit to Sleep Mode but does not turn
off power.
understanding the display and controls
The treadmill display is a computerized panel used to operate the treadmill and
see all workout data and operational status. You should familiarize yourself with
the operation of the treadmill and location of all keys before beginning use.
treadmill Magnetic safety stop cord
qqqqq
iMPOrtaNt
The emergency stop cord should always be in use
while on your treadmill. The magnetically activated switch is located on bottom of
the display console. This magnetic key is an emergency shut off and will abruptly
stop the walking belt should you fall down while using the treadmill. Always
be sure the cord is securely clipped onto an article of clothing. removing this
magnetic key while not in use will prevent children or unwanted users from
operating the treadmill.
gettiNg started
emergency stop Key
Power switch