Nautilus PRO SERIES TREADMILLS T7.14 - Manual (Page 28)

N
a
u
ti
lu
s
®
M
a
iN
te
N
a
N
c
e
C ha ng i n g t h e g a m e i n h ea lt h a n d f i t n e s s ™
visually inspect and clean the treadmill regularly. daily visual inspection
should include:
• Inspect the power cord and walking belt for wear.
• Check the position of the walking belt; be sure it is not rubbing against the
frame. The belt should be evenly spaced on the deck within 0.25 inch; adjust
if necessary.
• Remove potential hazards from the treadmill area.
cleaning
• Daily: Keep the treadmill and display free of dust and debris. Use a damp
sponge to wipe the exteriors and walking belt; do not soak surfaces. Dry all
surfaces thoroughly.
Use a mild glass cleaner to clean display and keypad areas. Do not spray cleaner
directly onto the treadmill. Spray cleaner onto a clean cloth.
qqqqq
WarNiNg
DRY MOP THE DECK UNDER THE BELT ONLY.
DO NOT ADD ANY LUBRICANTS. ADDING LUBRICANTS CAN RUIN THE
PROPRIETARY FRICTION-CONTROL SURFACE.
DO NOT USE DETERGENTS OR CLEANING AGENTS ON ANY PART
OF THE DECK.
DO NOT LET LIQUID ENTER THE TREADMILL OR DISPLAY.
• Weekly: Elevate the treadmill to maximum incline and vacuum the floor
under it to prevent excess dust and dirt from interfering with operation.
treadmill interior
Depending upon the treadmill environment, dust and or lint can accumulate
under the hood. Periodic internal cleaning should be done by a qualified
service personnel.
qqqqq
WarNiNg
DO NOT REMOVE THE TREADMILL HOOD:
DANGEROUS VOLTAGES ARE PRESENT. COMPONENTS ARE SERVICEABLE
ONLY BY QUALIFIED SERVICE PERSONNEL.
iNsPectiON & cleaNiNg