Nikon XTS 5000 - Manual (Page 47)

ASTRO XTS 5000 Model I 37
Special Radio Features
Reprogram Request (ASTRO 25 Trunking Only)
This feature lets you notify the dispatcher that you want a new
dynamic regrouping assignment.
Select Enable / Disable
The dispatcher can classify regrouped radios into either select
enabled or select disabled.
• Select-enabled radios are free to change to any available channel,
including the dynamic-regrouping channel, once the user has
selected the dynamic-regrouping position.
• Select-disabled radios cannot change channels. The dispatcher has
forced the radio to remain on the dynamic-regrouping channel.
The Scan or Private Call feature cannot be selected while your radio
is select disabled.
1 Press the preprogrammed
Reprogram Request button.
The reprogram request is sent
to the dispatcher. • Reprogram request sent
2 If you hear one beep, press the
PTT button to send the
reprogram request again.
OR
• One beep
If you hear five beeps, the
reprogram request was
acknowledged by the
dispatcher.
OR • Five beeps
If the dispatcher does not
acknowledge the reprogram
request within six seconds, you
hear a low-pitched alert tone.
Try again.
• Alert tone
94C25-G_XTS5000Mdl1.book Page 37 Tuesday, May 6, 2008 6:09 PM