Nikon XTS 5000 - Manual (Page 14)

4
General Radio Operation
Backlight
If poor light conditions make the channel numbers (around the
16-Position Select knob) difficult to read, turn on the radio’s
backlights by pressing the preprogrammed Light button.
These lights will remain on for a preprogrammed time before they turn
off automatically, or you can turn them off immediately by pressing the
Light button again.
LED Indicators
The LED on top of the radio indicates the radio’s operating status:
Table 3: Programmable Features
Feature Page Feature Page Feature Page
Call Response 29 Nuisance Delete 27 Secure/Clear 33
Channel 14 PL Defeat 19 Site Lock/
Unlock 39
Dynamic Priority 28 Repeater/Direct 31 Site Search 39
Emergency 20 Reprogram
Request 37 TX Power Level 19
Light 4 Scan On/Off 27 Volume Set 16
Monitor 17 Scan List
Programming 25 Zone 14
Table 4: LED Indicators
LED Indicator What it Means
Red Radio transmitting
Flashing red • Channel busy, or
• Low battery (while transmitting)
Double flashing red Receiving encrypted audio
Flashing green Receiving an individual call
94C25-G_XTS5000Mdl1.book Page 4 Tuesday, May 6, 2008 6:09 PM