NISSAN 2008 Armada - Manual (Page 7)

4
HEADLIgHT AND TuRN SIgNAL CONTROL
TO ACTIVATE THE AUTOLIGHT SYSTEM:
Turn the headlight control switch 01 to the AuTO position
to activate the autolight system. The autolight system can:
 Turn the headlights on automatically when it is dark.
 Turn the headlights off automatically when it is light.
 Keep the headlights on for 45 seconds after you turn the ignition switch to OFF and
all doors are closed.
TO DEACTIVATE THE AUTOLIGHT SYSTEM:

Turn the headlight control switch 01 to the OFF, or position.
HEADLIGHT CONTROL SWITCH

Turn the headlight control switch 01 to the position to turn on the front parking,
tail, license plate and instrument panel lights.
 Turn the headlight control switch 01 to the position to turn on the headlights. All
other lights remain on.
FOG LIGHT OPERATION (if so equipped)
NOTE: The headlights must be on and the low beams selected for the fog lights to
operate.
 Turn the switch (inside collar) 02 to the position to turn on the fog lights.
 Turn the switch (inside collar) 02 to the OFF position to turn off the fog lights.
TURN SIGNAL SWITCH

Move the headlight control switch up or down
A
to
signal a turning direction. When the turn is completed,
the turn signals cancel automatically.
 To signal a lane change, move the headlight control
switch up or down b to the point where the indicator
light begins to flash, but the headlight control switch
does not latch.
HIGH BEAM

Push the headlight control switch forward C to
select the high beam function. The blue indicator
light illuminates. Pull the headlight switch back to the
original position to select the low beam. The blue
indicator light goes off.
 Pull and release the headlight control switch
D
to flash
the headlight high beams on and off.
01
02
A
b
b
A
C
D