NISSAN 2008 Armada User Manual
Page 15
12
REARVIEW MONITOR (if so equipped)
When the automatic transmission lever is moved to the R
(Reverse) position, the monitor display will automatically
change to show the area directly behind the vehicle.
The colored lines on the display screen indicate approximate
distances to objects.
Red 1.5 feet; yellow 3 feet; Green 7 and 10 feet.
Refer to your Owner’s Manual for detailed information regarding Rearview Monitor usage.
INSTRuMENT bRIgHTNESS CONTROL/TRIP CHANgE buTTON
The instrument brightness control operates when the headlight
control switch is in the
or
position.
Turn the control to adjust the brightness of the instrument panel lights.
Press the change button to select trip computer features.
CLOCk SET/ADJuSTMENT
(if so equipped)
Press the SETTING button, then select the
“Clock” key using the NISSAN controller and
press the ENTER button to access the
following clock settings:
On-screen Clock – When this item is
turned to ON, a clock is always displayed in
the upper right corner of the screen.
Clock Format – Choose either the 12-hour clock display or the 24-hour clock display.
Daylight Savings Time – Turn this item to ON for daylight savings time application.
Time Zone – Choose the time zone.
Clock Adjust – Adjust the time by manually inputting the correct time.
CLOCk SET/ADJuSTMENT
(Navigation System only)
Press the SETTING button, then select the
“Clock” key using the NISSAN controller and
press the ENTER button to access the
following clock settings:
On-screen Clock – When this item is
turned to ON, a clock is always displayed in
the upper right corner of the screen. The
clock is automatically adjusted by the GPS system.
Clock Format – Choose either the 12-hour clock display or the 24-hour clock display.
Offset Adjust – Adjust the time by increasing or decreasing per minute.
Daylight Saving Time – Turn this item ON for daylight savings time application.
.