beautypg.com

Additional information operation – NAD T514 User Manual

Page 25

background image

25

ENGLISH

FRANÇAIS

DEUTSCH

NEDERLANDS

ESP

AÑOL

IT

ALIANO

POR

TUGUÊS

SVENSKA

ADDITIONAL FEATURES

LAST SCENE MEMORY

This player memorizes the last scene from the last disc that is viewed.
The last scene remains in memory even if you remove the disc from the
player or switch off the player. If you load a disc that has the scene
memorized, the scene is automatically recalled.

NOTE

This player does not memorize the scene of a disc if you switch off
the player before commencing to play the disc.

SCREEN SAVER
The screen saver appears when you leave the DVD player in Stop mode
for about five minutes. If the Screen Saver is displayed for five minutes,
the DVD Player automatically turns itself off.

VIDEO MODE SETTING
• With certain discs, the playback picture may be flickering or Dot

Crawl is shown on straight lines. That means Vertical interpolation or
De-interlace is not perfectly matched with the disc. In this case, the
picture quality may be improved by changing the video mode.

• To change the video mode, press and hold DISPLAY about 3 seconds

during disc playback. The new video mode number selected is
displayed on the TV screen. Check whether the video quality has
improved. If not, repeat the above procedure until picture quality is
improved.

• Video mode change sequence:

MODE1

→ MODE2 → MODE3 → MODE1

• If you turn off the power, the video mode will be back to initial state

(MODE1).

TIP
DETAILED DESCRIPTIONS FOR VIDEO MODES
MODE1
: The source material of the DVD video (film material or video
material) is determined from disc information.
MODE2: Suitable for playing film based content or video based material
recorded by the progressive scan method.
MODE3: Suitable for playing video based content with comparatively
little motion.

NOTE

The video mode setting only works when the Progressive Scan mode
is set to “On” in the Setup menu.

SYSTEM SELECT
You must select the appropriate system mode for your TV system. If NO
DISC appears in the display window, press and hold PAUSE on the front
panel for more than 5 seconds to be able to select a system
(PAL, NTSC, or AUTO).

VCD

DVD-V

ADDITIONAL INFORMATION

Operation

T514C_NAD_English_Finalv5.1.qxd 2/24/2005 11:18 AM Page 25