NEC 2000 - Manual (Page 44)

3-8 Configuring the System
Main Menu Items
Menu Item Settings (default is bold)
Primary IDE Master
Primary IDE Slave
Secondary IDE Master
Secondary IDE Slave 10263 MB
None
CD-ROM
None
Note: The following setting information
applies to the primary and secondary master
and slave devices.
Each device menu item displays the hard
drive or CD-ROM identifier if a device is
installed.
If you install a hard drive that does not feature
auto IDE type detection or your IDE hard
drive was formatted on another system with
parameters different from those reported by
the drive, enter a parameter for each of the
fields in the device submenu.
Bring up a device submenu by pressing
Enter. The submenus include Type, CHS
Format, and LBA Format. Each submenu and
its fields are described next.