NEC 2000 - Manual (Page 22)

1-12 Reviewing System Features
Optional Modem Connector
Some systems might come with an optional V.90 56K modem board in
place of the LAN board. Use the modem connector on the rear of the
system to connect your telephone line to the system.
VGA Connector
The system unit comes with a VGA connector on the rear of the system
unit.
Use this connector to connect an optional NEC MultiSync
®
monitor, NEC
AccuSync™ monitor, or other VGA-compatible monitor with a 15-pin
connector. You can also attach a projector with a 15-pin connector to this
connector.
The system supports simultaneous use of the LCD panel and an optional
monitor connected to the VGA connector.
DC Power Connector
The system operates with DC power supplied from the AC power adapter.
The adapter plugs into an AC power source and the DC power connector
at the rear of the system unit. The AC power adapter uses a standard
115-Vac or 230-Vac grounded power source.