Nvidia IN9 32X - Manual (Page 32)

2-2 IN9 32X/IN9 32X -MAX
2.1 μGuru
™
Utility
There are two setup menus in this μGuru utility. You may switch between these two by clicking
the left or right arrow key on keyboard:
2.1.1 OC Guru
μGuru Utility v1.00C
OC Guru
Intel(R) Core(TM)2 Quad CPU @ 2.66GHz Item Help ►
Frequency : 2666.7MHz
Setting Current
SLI-Ready Memory Disabled Detected
CPU Operating Speed 2666(266)
X - FSB Auto 1066.7
X - Multiplier Factor X 10
X - Estimated New CPU Clock 2666.7MHz
X - MEM Auto 666.7
X - FSB:Memory Ratio Auto
X - N/B Strap CPU As By CPU
X - Estimated DDR2 Data Rate 666.7
NB PCIe X16 Clock Auto 100.0
SB PCIe X16 Clock Auto 100.0
SB PCIe X8 Clock Auto 100.0
SPP<->MCP REF Clock Auto 200.0
► Voltages Control Press Enter
► Power Cycle Statistics Press Enter
‚€ :Move Enter:Select +/-/PU/PD:Value F8:OC On The Fly F10:Save ESC:Exit
Genuine Intel(R) CPU
This item displays the CPU model name installed on this motherboard.
Frequency
This item displays the processor speed of the CPU installed on this motherboard.
SLI-Ready Memory
This item selects the SPD profile for SLI-Ready memories. The configuration options may vary
depending on the type of module you installed.
※ The following items become configurable when the item “SLI-Ready Memory”
is set to [Enabled].
CPU Operating Speed
This item displays the CPU operating speed according to the type and speed of your CPU. Select
the [Linked] or [Unlinked] mode to enter the manual option.
Manual Option:
※
The wrong settings of the multiplier and external clock in certain
circumstances may cause CPU damage. Setting the working frequency higher
than the PCI chipset or processor specs, may cause abnormal memory module
functioning, system hangs, hard disk drive data lose, abnormal functioning of
the VGA card, or abnormal functioning with other add-on cards. Using
non-specification settings for your CPU is not the intention of this explanation.
These should be used for engineering testing, not for normal applications.