Nokia MW1122 - Manual (Page 52)

Managing MW1122
E Copyright Nokia Networks Oy C33902001SE_00 5-17
5.3.4 WLAN Clients page
On the WLAN Clients page you can enable access control based on the
MAC addresses of the wireless LAN clients. When access control is
enabled, only the wireless stations on the Client table are allowed
access to your wireless network. On this page, you can also activate
Wired Equivalent Privacy (WEP) and set the encryption key
parameters. Note, that unless you have encryption enabled other
WLAN clients nearby have the possibility of monitoring the traffic on
your wireless network
Figure 5-4 WLAN Clients page
Enabling access control
You can add a wireless station to the Client table by typing its MAC
address to the MAC address field and clicking the Add new button. Use