Nokia MW1122 - Manual (Page 105)

MW1122 Administrator Manual
E Copyright Nokia Networks Oy C33902001SE_00 5-70
Command Set wireless LAN interface slave to Ethernet inter-
face
Description This command makes the wireless LAN interface slave
to Ethernet interface. In this case you do not have to
assign an IP address to the wireless LAN interface. The
IP address of the Ethernet interface serves also as an
IP address to the wireless LAN interface. Note that you
must issue this command on the root level of the con-
figuration mode.
Syntax [no] wlan slave-to-eth
Arguments None.
Example
MW1122(conf)#wlan slave-to-eth
MW1122(conf)#
Command Switch on/off bridging
Description Switches of bridging at the WLAN interface.
Syntax [no] bridging
Arguments no switches bridging off.
Example
MW1122(conf-wlan)#bridging
MW1122(conf-wlan)#
Command Switch on/off IP function in wireless LAN interface
Description Switches on/off IP function in the Wlan interface.
Syntax [no] ip address
Arguments no switches IP function off.
ip-address is the IP address you want to assign to
the wireless LAN interface.
ip-mask is the subnet mask.
Example
MW1122(conf-wlan)#ip address 192.168.132.12
255.255.255.0
MW1122(conf-wlan)#