Nokia MW1122 - Manual (Page 107)

MW1122 Administrator Manual
E Copyright Nokia Networks Oy C33902001SE_00 5-72
Command Disable/enable management through the wireless
LAN interface
Description Enables/disables the management of MW1122 through
the wireless LAN interface.
Syntax [no] ip admin-disabled
Arguments no enables management through the wireless LAN in-
terface.
Example
MW1122(conf-wlan)#ip admin-disabled
MW1122(conf-wlan)#
VCC (ATM channel) commands
Command Activate ATM channel
Description Activates an ATM channel and sets the encapsulation
for that channel.
Syntax [no] pvc
Arguments no deactivates the ATM channel.
vpi is the Virtual Path Identifier of the ATM channel.
Possible values are 0...255.
vci is the Virtual Channel Identifier of the ATM chan-
nel. Possible values are 0...65535.
encap is the encapsulation of the ATM channel. The
encapsulations are auto-llc , eth-llc , ip-llc ,
ppp-vc , and tunneled-ppp-vc . auto-llc en-
capsulates the routed packets in ip-llc and the bridged
packets in eth-llc.
Example
MW1122(conf-vccx)#pvc 0 100 ip-llc
MW1122(conf-vccx)#
Command Switch on/off bridging
Description Switches bridging on/off on the specified ATM channel.
Syntax [no] bridging
Arguments no switches off bridging.
Example
MW1122(conf-vccx)#bridging
MW1122(conf-vccx)#