Nokia 2125 - Manual (Page 50)

S e t t i n g s
40 Copyright © 2005 Nokia. All rights reserved.
If you enter the wrong lock code 5
times in succession, you will not be
able to enter a code for 5 minutes,
even if you power off the device
between incorrect entries.
1. In standby mode, select Menu >
Settings > Security settings >
Access codes > Change lock code .
2. Enter the new lock code (must be 4
characters in length), reenter the
new lock code for verification, and
select OK .
Voice privacy
Voice privacy is a network service.
See “ Network services ”, p. viii . If your
wireless service provider or network
operator supports this feature, the
voice privacy feature protects the
privacy of your current phone
conversation from other callers placing
phone calls on your same network.
In the standby mode, select Menu >
Settings > Security settings > Voice
privacy > On or Off .
■ Network
The menu options you see in your
phone are based on your service
provider’s network. The network
determines which options actually
appear in the phone menu. Check with
your service provider for more
information.
The Network menu allows you to
personalise the way your phone
chooses a network in which to operate
while you are within or outside of your
primary or home system. Your phone is
set to search for the most cost-
effective network. If your phone
cannot find a preferred network,
it selects a network automatically
based on the option you choose in the
Network menu.
Roaming options
To set your phone to roam or search for
another network when you are not in
your home area, do the following:
1. In the standby mode, select
Menu > Settings > Network >
Roaming options > Automatic .
Automatic —Phone automatically
searches for service in another
digital network. If one is not found,
the phone uses analog service.
The roaming rate applies when you
are not in the home service area.
2. Select OK , if necessary, to confirm
the activation.