NetComm YML-O-3G19W - Manual (Page 41)

YML-O-3G19W 3G WiFi Router User Guide
www.netcomm.com.au 41
NETCOMM LIBERTY™ SERIES - 3G WiFi Router
8. Status
The Status menu has the following submenus:
• Diagnostics
• System Log
• 3G network
• Statistics
• Route
• ARP
• DHCP
• PING
8.1 Diagnostics
The Diagnostics menu provides feedback on the connection status of the device. The individual tests are listed below. If a test displays a
fail status:
1. Click on the Help link
2. Now click Re-run Diagnostic Tests at the bottom of the screen to re-test and confirm the error
3. If the test continues to fail, follow the troubleshooting procedures on the Help screen.
OPTION DESCRIPTION
Test your ENET (1-4) Connection Pass: Indicates that the Ethernet interface from your computer is connected to the LAN port of
this Router.
Fail: Indicates that the Router does not detect the Ethernet interface on your computer.
Test your Wireless connection Pass: Indicates that the wireless card is ON.
Down: Indicates that the wireless card is OFF.
Ping Primary Domain Name Server Pass: Indicates that the Router can communicate with the primary Domain Name Server (DNS).
Fail: Indicates that the Router was unable to communicate with the primary Domain Name
Server (DNS). It may not have an effect on your Internet connectivity.
Therefore if this test fails but you are still able to access the Internet there is no need to
troubleshoot this issue.