Niles Audio SI-2125 - Manual (Page 19)

SP
eCI
fICATIONS
18
SPeCIfICATIONS
Design Principle
linear voltage/current amplification.
Continuous Average Power Output
125 watts per channel rMS at 8 ohms, both channels driven
175 watts per channel rMS at 4 ohms, both channels driven
350 watts bridged channel rMS at 8 ohms.
Input Impedance
18K ohms
Input Sensitivity
.830V for 8 ohm rated power
.720V for 4 ohm rated power
Overall Voltage Gain
31.5 db
Frequency Response
bandwidth limited from 10 hz to 70 khz (-1 db)
Signal to Noise Ratio
110 db, A-weighted
Total Harmonic Distortion
8 ohms
.02% thd from 20 hz to 20 khz @ full rated power
4 ohms
.02% thd from 20 hz to 10 khz @ full rated power
Overall Dimensions
17” wide 5 1/2” high (including feet) 13-1/8” deep
Weight
26 lbs